Electrical power UNITS FOR LIFT TABLE

Power UNITS FOR LIFT TABLE 1
Standard Description
This energy unit is created solely for your modest lift table,Consisting of substantial strain gear pump, AC motor, multi-functional manifold, valves, tank, and so on. This energy unit continues to be widely applied in the industry of logistic units like minifork lift, scissors lift and ariel functioning platforms. The lower-ing movement is controlled through the solenoid valve using the pace managed through the adjustable needle valve.
Electrical power UNITS FOR LIFT TABLE 2
Basic Description
This power unit is built solely for the medium lift table, Consisting of very effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The decreasing movement is actived through the solenoid valve and the pace controlled by the adjustable needle valve. When the lift rises to a large positoin, but the power supply is cut, the decreasing motion is managed through the guide override function.
Energy UNITS FOR LIFT TABLE three
Common Description
This energy unit is made solely for that significant lift table, Consisting of remarkably effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The lowering motion is actived from the solenoid valve and the velocity managed by a pressure compensated movement management valve.
Power UNITS FOR LIFT TABLE 4
Basic Description
This electrical power unit is created exclusively for that large lift table, Consisting of very effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing movement is actived through the solenoid valve as well as the velocity controlled through the adjustable needle valve. Once the lift rises to a substantial positoin, but the power provide is reduce, the decreasing movement is controlled by the manual override perform.
Special Notes
1. This power unit is of S3 duty cycle, which may only do the job intermittently and repeatedly, i.e. one minute on and 9 minutes off.
2. Clean all of the hydraulic parts concerned before installation of the energy unit.
3. Viscosity of the oil shoud be 15~46 cst,which should really also be clean and no cost of impurities.N46 hydraulic oil is proposed.
4. Oil shifting is needed after the preliminary a hundred operation hrs,afterwards once just about every 3000 hrs.
five. The power unit proven is created to be mounted vertically.

Tags:

Tractor Pto adapter

As one of leading tractor pto adapter manufacturers, suppliers and exporters of mechanical products, We offer tractor pto adapter and many other products.

Please contact us for details.

Manufacturer supplier exporter of tractor pto adapter.

Recent Posts